Shimano Alfine S7000 Series Dealer's Manual page 7

TO ENSURE SAFETY
For Installation to the Bicycle, and Maintenance:
• The cassette joint should only be used with sprockets from 16T to 23T.
• It is recommended that the chain ring of the front be set to the following gear ratio.
Sprocket
ratio
11-speed 1.8 - 2.0
8-speed 2.0 - 2.25
• In order to maintain proper performance, it is recommended that you contact the place of purchase or a bicycle dealer to carry out maintenance such
as internal oil replacement or lubrication after riding 1,000km from the start of use and then after about once every two years (or once about every
5,000km if the bicycle is used very frequently).
Also, it is recommended to use Shimano internal geared hub grease or a lubrication kit for the maintenance. If Shimano grease or a Shimano
lubrication kit is not used, problems such as a malfunction in gear shifting may occur.
• If the wheel becomes stiff and difficult to turn, you should lubricate it with grease.
• You should periodically wash the sprockets in a neutral detergent and then lubricate them again. In addition, cleaning the chain with neutral
detergent and lubricating it can be an effective way of extending the useful life of the sprockets and the chain.
Front
Model No. Gear
14
38T -
39T -
FC-S5011
FC-C6000
42T -
45T -
45T -
FC-S501
42T -
FC-S400
39T -
SM-GEAR
15 16 17 18 19
- - - - X
- - - - -
- - - - -
- - - - -
- - - - -
- - - - X
- - - X X
7
Rear
FC-S5011
20 21 22 23 18
X X - - -
X X - - -
- X X X -
- - - X -
X X X - -
X X - - -
- - - - -
FC-S500
20 18 20
X - -
X - -
- - -
- - -
- - X
- - X
- X -