Shifting Switch Installation Instructions; Motor Unit Installation Instructions - Shimano DI2 Adapter B Dealer's Manual

INSTALLATION

Shifting Switch Installation Instructions

„ Shifting Switch Installation Instructions
Connect the electric wire (B) on the shifting switch (D) side to Junction (C).
Connect the electric wire on the DI2 Adapter B (A) side in the same manner.
(A) (B)
„ Motor Unit Installation Instructions
(C)
Connect the electric wire connected to
the DI2 Adapter B to the motor unit (A).
(A)
(B) (D)
14
(A)
DI2 Adapter B EW-EX010
(B)
Electric wire EW-SD50
(C)
Junction EW-JC200
(D)
Shifting switch
•
When not using EW-JC200, directly connect
the electric wire connected to the DI2
Adapter B to the shifting switch.
•
The maximum length of the electric wire is
1600 mm.
(A)
Motor unit
The maximum length of the electric wire is
700 mm.