To Ensure Safety - Shimano Alfine S7000 Series Dealer's Manual

TO ENSURE SAFETY

TO ENSURE SAFETY
• When installing components, be sure to follow the instructions that are given in the instruction manuals.
It is recommended that you use only genuine Shimano parts. If parts such as bolts and nuts become loose or damaged, the bicycle may suddenly fall
over, which may cause serious injury.
In addition, if adjustments are not carried out correctly, problems may occur, and the bicycle may suddenly fall over, which may cause serious injury.
• Be sure to wear safety glasses or goggles to protect your eyes while performing maintenance tasks such as replacing parts.
• After reading the dealer's manual thoroughly, keep it in a safe place for later reference.
Be sure to also inform users of the following:
• Check that the wheels are fastened securely before riding the bicycle. If the wheels are loose in any way, they may come off the bicycle and serious
injury may result.
„Brake
• Each bicycle may handle slightly differently depending on the model. Therefore, be sure to learn the proper braking technique (including brake lever
pressure and bicycle control characteristics) and operation of your bicycle. Improper use of your bicycle's brake system may result in a loss of control or
a fall, which could lead to severe injury. For proper operation, consult a professional bicycle dealer or the bicycle's owner's manual. It is also important
to practice riding and braking, etc.
• If the front brake is applied too strongly, the wheel may lock and the bicycle may fall forward, and serious injury may result.
• Always make sure that the front and rear brakes are working correctly before riding the bicycle.
• The required braking distance will be longer during wet weather. Reduce your speed and apply the brakes early and gently.
• If the road surface is wet, the tires will skid more easily. If the tires skid, you may fall off the bicycle; therefore, to avoid this, reduce your speed and
apply the brakes early and gently.
„Disc brake
• Please make sure to keep your fingers away from the rotating disc brake rotor. The disc brake rotor is sharp enough
to inflict severe injury to your fingers if caught in the openings of the disc brake rotor while it is moving.
• The calipers and disc brake rotor will become hot when the brakes are operated; do not touch them while riding or immediately after dismounting
from the bicycle. Otherwise you may get burned.
• Be careful not to allow any oil or grease to get onto the disc brake rotor and brake pads. Otherwise the brakes may not work correctly.
• If any oil or grease gets on the brake pads, consult a dealer or an agency. Otherwise the brakes may not work correctly.
• If noise occurs during brake operation, the brake pads may have been worn down to the usable limit.
After checking that the temperature of the brake system has cooled down sufficiently, check that the thickness of
each pad is 0.5mm or more. Or, consult a dealer or an agency.
• If the disc brake rotor is cracked or deformed, immediately stop using the brakes and consult a dealer or an agency.
• If the disc brake rotor becomes worn down to a thickness of 1.5mm or less, or if the aluminum surface appears, immediately stop using the brakes and
consult a dealer or an agency. The disc brake rotor may break, and you may fall off the bicycle.
WARNING
4
2mm 0.5mm