LG PRCKD42E Owner's Manual page 35

- CO sensor(option)
2
Item
CO sensor
2
Ex: CO Sensor Connection
2
Terminal Block#3
!
CAUTION
• Improper wiring of the sensor can damage the Main Controller of the AHU.
Make sure to check for any incorrect wiring before turning the power on.
1. For more information on the installation of CO
with the sensor.
2. Make sure to finish all the sensor wires with a flexible tube.
Specification
- Power: AC 24 V
- Output Signal: DC 0~10 V
- Range: 0~2 000 ppm
B1 B2
AHU SENSOR CONNECTION
-I/O PCB #2
G
<Inside the Control Kit>
AC 24 V(G)
Ground(G0)
DC 0~10 V(U)
sensors, refer to the Manual that came
2
35
Remark
Option