LG PRCKD42E Owner's Manual page 66

SYSTEM SETTINGS
66
System Settings 3
- In System Settings 3, you can set the values necessary for linking the Main Control (Auto Con-
trol) with the outdoor unit.
- In order for the AHU to be linked with the Central Control in the upper section, you need to set
the address as well as the number of supply/ventilation fans to be linked and have them re-
flected in the HMI. When the outdoor unit enters the Defrost mode while heating during the
linking process, you can set the default temperature for fan ON/OFF.
1) Central Control Address Settings
You need to set a designated address in order to link it with the Central Control (Auto Con-
trol).
You can set the address using a decimal or hexadecimal digit.
② Click the box to open an input box where you can enter the address. (The input box can
be different according to the address setting method.)
- Decimal Digit Address Input Method
① You can select the address setting
method by clicking this button.
③ Enter the desired input value by using
the key button.
④ Enter the value and then click the
'OK' button to enter the input value.