Page 1
INSTALLATION/ OWNER’S MANUAL CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. Data Saving Module (Multi-V) PVDATN000 www.lg.com P/NO : MFL62179512...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY • Be sure to turn off outdoor unit power be- fore installation. It will cause electric shock. INSTRUCTIONS In-use • Do not place flammable stuffs close to the READ ALL INSTRUCTIONS product. It will cause fire. BEFORE USING THE APPLIANCE.
PC CONNECTION FOR DATE & TIME SETTING PC CONNECTION FOR DATE & TIME SETTING • How to connect - Connect Data Saving Module and Multi-V Outdoor Main PCB with Data Saving Cable - Connect PC and PI232 module with RS232 ②...
NAME OF EACH PART NAME OF EACH PART Yellow Green Power LED RX LED TX LED NOTE Debugger connector : For bootloader pro- • Remove the SD card after turning off gram writing and debugging. the start switch. Start S/W : On/Off switch for data save. •...
NAME OF EACH PART Operation Outdoor Main PCB NOTE • Default state of dip switch is all off. Data Saving Module Step 1. Turn off start switch in Data Saving Module. Step 2. Dip switch position depend on the model. SW2 (ON) &...
NAME OF EACH PART Data Converter • Data Converter SD data converter is windows PC based program that converts encoded file to an easy form of readable file for user. • When execute DataConverter(130609).exe file, it displays as belows. - Select file for convert (multiple selection is supported) - Model Type Selection (if selected file is Multi-V IV then model type will be automatically checked) - Output File Selection (depend on the IDU num or HR unit existence)
Page 7
Representative: LG Electronics Inc. EU Representative, Krijgsman 1, 1186 DM Amstelveen, The Netherlands Manufacturer: LG Electronics Inc. Changwon 2nd factory, 84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA...