Setting the required sensors
In order to set the sensors, press the button on the box to
see the list of sensors that can be selected.
1) Setting Ventilation (RA)
- Click the "
" button to see the list of heat sources you can select from as shown below.
- Select the type of ventilation sensor installed in Ventilation.
(Refer to 'System Settings' for more details on sensor value.)
※ It won't be possible to set the temperature based on the ventilation air if the ventilation
sensor is not set.
2) Setting Supply (SA)
- Click the "
" button to see the list of heat sources you can select from as shown below.
- Select the type of supply sensor installed in Supply.
!
CAUTION
• If the ventilation sensor is not set
- In the case of an all-fresh-air system, a ventilation temperature sensor is not required
according to the AHU type settings, but it is required in an air handling unit type for con-
trolling the ventilation temperature.
• When the supply sensor is set as temperature sensor
- When the supply sensor is set to Temperature Sensor instead of Temperature/Humidity
Sensor, additional operation modes related to humidity cannot be selected. So make sure
to install a temperature/humidity sensor in order to use humidity-related modes and select
Temperature/Humidity Sensor.
HMI SETTINGS/INSTALLATION
49