Important Safety Instructions - LG PRCKD42E Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
! WARNING
It can result in serious injury or death when the directions are ignored.
! CAUTION
It can result in minor injury or product damage when the directions are ignored.
! WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• The product shall be installed according to the Wiring regulations of the corresponding coun-
try.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment mal-
function, property damage, personal injury and/or death.
Installation
• The electrical work shall be performed by the technician with qualification according to Electric Facil-
ity Technical Standard and this installation manual, and the specified circuits must be used.
- If power capacity is inadequate or if the electrical work is defective, it may cause fire or electric
shock.
• Make sure to perform the grounding work.
- If it is not grounded, it may cause electric shock.
• Make sure to install leakage current breaker and exclusive switch.
- If they are not installed, it may cause fire or electric shock.
• Do not use damaged leakage current breaker or switch.
- It may cause fire or electric shock.
• System air conditioner installation can only be performed by the specialty store with system air con-
ditioner installation license.
- Inadequate installation may cause water leakage, fire, or electric shock.
• During the relocation or re-installation of the product, request to MULTI V AHU installation specialty
store.
- Inadequate installation may cause water leakage, fire, or electric shock.
• Do not disassemble, repair, or modify the product without authorization.
- It may cause fire or electric shock.
• Do not keep or use combustible gas or inflammable material near the product.
- It may cause fire or product disorder.
• Please use the circuit breaker and fuse with the specified capacity.
- If a circuit breaker or fuse above the specified capacity or steel or copper wire is used, it may
cause overall product disorder or fire.
IMPORTANT SAFETY INSTRUCTIONS
3