HMI SETTING
98
6. Cooling Mode Damper Angle
When using the Cooling mode, set the damper angle in the Normal mode after the warm-up
time.
① Outdoor Damper Settings
① Outdoor Damper
The default outdoor damper is 0 °, and it can be adjusted at an increment/decrement of 1 °
between 0 ° and 90 °.
② Exhaust Damper
The default exhaust damper is 0 °, and it can be adjusted at an increment/decrement of 1 °
between 0 ° and 90 °.
③ Mixing Damper
The default mixing damper is 90 °, and it can be adjusted at an increment/decrement of 1 °
between 0 ° and 90 °.
- A warning message will appear if the value of each damper is outside the range, at which
time you can re-enter the value.
② Exhaust Damper Settings
① Enter the desired input value by using
the key button.
② Enter the value and then click the 'OK'
button to enter the input value.
③ Mixing Damper Settings