LG PRCKD42E Owner's Manual page 102

HMI SETTING
102
2. Inverter Fan Control Conditions
Select the method of controlling the supply/ventilation fan operation frequency.
Three different conditions cannot be selected simultaneously, and the supply/ventilation fan
operation frequency is determined by the selected condition.
- When fan speed is selected: Control the fan in accordance with the selected wind speed.
- When temperature is selected: Control the fan in accordance with the desired/current tem-
perature.
- When static pressure is selected: Control the fan in accordance with the selected/current
static pressure. (The static pressure can be set only after a static pressure sensor is installed.)
3. Static Pressure Control Conditions
The Static Pressure Control mode can be activated only when 'Static Pressure Standard' is se-
lected in Inverter Fan Control Standards, but the setting value cannot be selected in Wind
Speed standard.
The unit can be set using Static Pressure method as shown below.
① Click the box to open a screen where
the setting can be set/entered.