Important Safety Instructions - LG V-NET ACS IO Installation & User Manual

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
! WARNING
It can result in serious injury or death when the directions are ignored
CAUTION
!
It can result in minor injury or product damage when the directions are ignored
! WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• Installation MUST conform with local building codes or, in the absence of local codes, with
the National Electrical Code NFPA 70/ANSI C1-1003 or current edition and Canadian Electrical
Code Part1 CSA C.22.1.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment mal-
function, property damage, personal injury and/or death.
When installing
• Product installation must be performed at the service center or by an expert.
- Failure to do so can cause fire, electric shock, malfunction or injury.
• When re-installing the already installed product it must be performed at the service center or by an
expert.
- Failure to do so can cause fire, electric shock, malfunction or injury.
• Use standard parts.
- Failure to do so can cause fire, electric shock, malfunction or injury.
• Do not store or use combustible gas or flammable substances near the product.
- Doing so can cause fire and electric shock.
• Do not disassemble, repair or modify the product at your own discretion.
- Doing so can cause malfunction.
• Do not install in a place that is susceptible to rain.
- Doing so can cause malfunction.
• Do not install in a place that is susceptible to humidity.
- Doing so can cause malfunction.
• Do not store the product near heating devices.
- Doing so can cause fire.
• Install it in a secure place that can withstand the weight of ACS IO.
- In case it is installed in a place unable to cannot withstand ACS IO it may fall and get damaged.
• Do not use the product in the following particular environments.
- Product performance may be hindered and the product may be damaged if used in a place where
gas, steam, or sulfuric acid is present.
• Do not touch the switch with wet fingers.
- Doing so may result in electric shock and cause the product to malfunction.
• Any electrical work must be done by an expert from where the product was purchased or at the
service center.
IMPORTANT SAFETY INSTRUCTIONS
3