Exerpeutic 1115 Owner's Manual page 18

8. Left/Right Handrails and Backrest Installation
Attach the Backrest (5) and Left Handrail (4) onto the Back and Seat Support
Bracket (17), using four Bolts (2) and four Washers (3). Tighten the Bolts (2) using the
5mm Allen Wrench provided.
Connect the Hand Pulse Sensor Wire (6) from the Left Handrail (4) to the Extension
Hand Pulse Sensor Wire (13) from the Right Handrail (12). Insert the Right Handrail
(12) into the tube hole of the Left Handrail (4) being careful not to pinch the wires.
Secure the Left Handrail (4) and Right Handrail (12) using two Bolts (9), two Big Curve
Washer (10), and two Cap Nuts (11). Tighten the Cap Nuts (11) using the Multi Hex
Tool with Phillips Screwdriver provided. Connect the Extension Hand Pulse Sensor
Wire I (29) to the Hand Pulse Sensor Wire (6) and Extension Hand Pulse Sensor Wire
(13).
Hardware:
(#2)
Bolt
4 PCS
ASSEMBLY
(#3) (#9)
Washer Bolt
4 PCS 2 PCS
16
Tool:
Allen Wrench 5mm
1PC
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15 1PC
(#10) Big Curve
Washer
2 PCS
(#11) Cap
Nut
2 PCS