Exerpeutic 1115 Owner's Manual page 12

ASSEMBLY
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15 1PC
2. Rear Stabilizer Installation
Lift up the Rear Main Frame (26), and align the Rear Stabilizer (38) onto the rear curve
of the Rear Main Frame (26). Insert two Bolts (37) into the Rear Stabilizer (38), then on the
threaded ends of the Bolts (37) attach two Big Curve Washers (36) and two Cap Nuts (35).
Hold the Rear Stabilizer (38) to the Rear Main Frame (26) and use the Multi Hex Tool with
Phillips Screwdriver provided to tighten the Cap Nuts (35) until secure.
Hardware:
(#35) Cap Nut
(#36) Big Curve Washer (#37) Bolt
2 PCS
2 PCS 2 PCS
10