ASSEMBLY
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15 1PC
7. Left and Right Foot Pedals Installation
NOTE: The Cranks, Pedal Shafts, and Foot Pedals are marked "R" for Right and "L"
for Left.
Insert the Left Foot Pedal (63) into the threaded hole in the left side of the Crank with Belt
Pulley (62). Turn the Left Foot Pedal (63) by hand in a counter-clockwise direction until
snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the Left Foot Pedal (63) using the Multi Hex Tool with Phillips Screwdriver provided.
Insert the Right Foot Pedal (61) into the threaded hole in the right side of the Crank with Belt
Pulley (62). Turn the Right Foot Pedal (61) by hand in a clockwise direction until snug.
Tighten the Right Foot Pedal (61) with the Multi Hex Tool with Phillips Screwdriver provided
15