1. Manuals
  2. Brands
  3. Exerpeutic Manuals
  4. Exercise Bike
  5. 1200
  6. Owner's manual

Exerpeutic 1200 Owner's Manual

Folding upright bike with pulse
Hide thumbs Also See for 1200:

Advertisement

Table of Contents

Folding Upright Bike with Pulse
IMPORTANT:
Read all instructions carefully before using this product. Retain this
owner's manual for future reference.
The specifications of this product
may vary from this photo, subject to change without notice.
4100.8-022117
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Exerpeutic 1200

Summary of Contents for Exerpeutic 1200

  • Page 1 Folding Upright Bike with Pulse IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference. The specifications of this product may vary from this photo, subject to change without notice. 4100.8-022117 OWNER’S MANUAL...

  • Page 2: Service

    PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. STOP. Contact customer service if you have any questions regarding assembly or proper operation of the machine. Email us at: Service@paradigmhw.com Or call us at: 1-844-641-7921 Hours: 8:00 am to 5:00 pm (PST) Daily...
  • Page 3 TABLE OF CONTENTS SERVICE ------------------------------------------------------------------------ 2 LABEL PLACEMENT --------------------------------------------------------- 3 IMPORTANT SAFETY GUIDELINES ------------------------------------ 4 OVERVIEW DRAWING ------------------------------------------------------ 5 PARTS LIST -------------------------------------------------------------------- 6 HARDWARE & TOOL LIST ------------------------------------------------ 8 ASSEMBLY --------------------------------------------------------------------- 9 CONSOLE FUNCTIONS ---------------------------------------------------- 13 STORAGE ----------------------------------------------------------------------- 14 OPERATIONS & ADJUSTMENTS ---------------------------------------- 15 TRANSPORT ------------------------------------------------------------------ 17 MAINTENANCE &...
  • Page 4 SERVICE IMPORTANT: FOR NORTH AMERICA ONLY For damaged or defective product, questions, replacement parts or any other service support, please contact our customer service department by the below methods: For The Best Service, please Email: service@paradigmhw.com Response Time: 1-2 Business Days Emailing us with the information above will be the best method to receive a response during peak business hours Website:...
  • Page 5 LABEL PLACEMENT...
  • Page 6 IMPORTANT SAFETY GUIDELINES Basic precautions should always be followed, including the following safety guidelines when using this equipment. Read all of the guidelines before using this equipment. 1. Before exercising and to avoid injuring your muscles, it is highly recommended that you perform warm-up exercises for each muscle group.
  • Page 7 OVERVIEW DRAWING...

  • Page 8: Parts List

    PARTS LIST Description Description Front Frame Hexagon Nut Cap M8 Rear Frame Curve Washer Ø8.2xØ22.2 Rear Stabilizer Front Stabilizer Ø50x1.5tx550L Handlebar C-ring Ø10 Seat Post Flat Washer Ø8.2xØ16.8 Seat Cushion Nylon Nut M8 Left Pedal Magnet Bracket Right Pedal Washer Ø6.2 Computer Sensor Wire Hand Pulse Sensor...
  • Page 9 PARTS LIST Description Description Washer Ø8.2x Ø25x2.0t Screw M5x10 Flat Phillips Head Screw M6x10 Hexagon Socket Bolt M8x43L Holder Handlebar End Cap Ø25.4 Round Phillips Head Screw Front Frame Support Tube End M4x10 Cap Ø22.2 Plastic Washer Hand Pulse Sensor Wire C-ring Ø15 Nut M6 Screw M4x10L...
  • Page 10 HARDWARE PACK & TOOLS LIST...

  • Page 11: Assembly

    ASSEMBLY TOOL 13,15mm Wrench Front Stabilizer (31) Transport Wheels Step 1 1A Frame Set Up: Extend the Front Frame (1) and the Rear Frame (2). Rest the Rear Frame Support Tube (67) into the hooked plate on the Front Frame (1). Align the upper pin holes of both frames.
  • Page 12 ASSEMBLY TOOLS PRE-INSTALLED HARDWARE (86) Right (84) Left 13-15mm Wrench Nylon Nut Nylon Nut 19mm Wrench Step 2 Tip: The Cranks, Pedals, Pedal Shafts, and the Pedal Straps are marked “R” for Right and “L” for Left. Note: DO NOT turn the Left Pedal (7) in a CLOCKWISE direction. DO NOT turn the Right Pedal (8) COUNTER-CLOCKWISE doing so will strip the threads of the left pedal shaft.
  • Page 13 ASSEMBLY TOOL 5mm Allen Wrench with Phillips Screwdriver Step 3 Tip: The Seat Cushion (6) has 2 sets of adjustment holes. It is recommended that users between 5’1” – 5’6” use the holes towards the rear. It is recommended that users between 5’7” to 6’3” us the holes towards the front.

  • Page 14: Front Frame (

    ASSEMBLY TOOL 5mm Allen Wrench with Phillips Screwdriver Step 4 Tip: If you need more room to install, lift the handlebars up. 4A Installing the Tension Control Knob: Place the Handlebar (4) onto the Front Frame (1), and remove the Console Cover (69) from the back of the Handlebar (4). Turn the Tension Control Knob (13) to the highest tension by turning it CLOCKWISE.

  • Page 15: Handlebar 1

    CONSOLE FUNCTIONS SPECIFICATIONS: TIME--------------------------------------- 0:00~99:59MIN CALORIE--------------------------------- 0.0~999.9KCAL SPEED------------------------------------ 0.0~999.9ML/H (KM/H) ODOMETER----------------------------- 0~9999ML (KM) DISTANCE------------------------------- 0.0~999.9ML (KM) PULSE------------------------------------ 40~240BPM COMPUTER FUNCTIONS: TIME: Press the MODE key until the pointer locks onto TIME; this will display the amount of time the bike has been in use. SPEED: Press the MODE key until the pointer locks onto SPEED;...
  • Page 16 STORAGE For your convenience, the bike can be folded up for storage. Remove the Safety Pin (22) from the upper pin hole on the Front Frame (1) Fold the Front and Rear frames together. Re-insert the Safety Pin (22) into the lower pin hole on the Front Frame (1) to secure the Front and Rear Frames (1,2) together.

  • Page 17: Adjusting The Seat Height

    OPERATIONS & ADJUSTMENTS Tension Control Knob (13) Adjusting the Tension Control Knob Increase Tension: Turn the Tension Control Knob (13) clockwise. Decrease Tension: Turn the Tension Control Knob (13) counterclockwise. Seat Height Adjustment Knob (14) Adjusting the Seat Height Loosen the Seat Height Adjustment Knob (14) by turning it counterclockwise. Pull AND hold to release the pin.

  • Page 18: Left Pedal

    OPERATIONS & ADJUSTMENTS Adjusting the Pedal Strap L mark The Left Pedal Strap (87) has an L marked on the strap (see Figure 1). Snap the slotted end of the Left Pedal Strap (87) onto the tab on the inside edge of the Left Pedal (7) (see Figures 2 and 3).
  • Page 19 TRANSPORT Transporting the Bike Hold the Handlebar (4) and tilt the bike forward until the wheels on the Front Stabilizer (31) make contact with the floor. Push or pull the unit to the desired location, then gently lower the Rear Stabilizer (3) back down to the ground.

  • Page 20: Computer 1

    MAINTENANCE & TROUBLESHOOTING MAINTENANCE Cleaning The bike can be cleaned with a soft, clean damp cloth. Do not use abrasives or solvents on the plastic parts. Wipe your perspiration off the bike after each use. Be careful not to get excessive moisture on the computer display panel as this might cause an electrical hazard or the electronics to fail.

  • Page 21: Tension Control Knob 1

    TROUBLESHOOTING TROUBLE SHOOTING PROBLEM: The pedals came unscrewed while in use. SOLUTION: Reinstall the pedals and if you cannot then contact Customer Service. PROBLEM: How to reset the data on display. SOLUTION: Hold the Mode Key down for 3-10 Seconds, this will reset the display (Note: The Odometer will not be reset.
  • Page 22 WARRANTY MANUFACTURER’S LIMITED WARRANTY Paradigm Health & Wellness warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with Paradigm’s Owner’s Manual.
  • Page 23 PARTS REQUEST FORM Paradigm Health & Wellness, Inc. EMAIL THIS FORM WITH YOUR RECEIPT OF PURCHASE TO Service@paradigmhw.com NAME:______________________________________________________________________ ADDRESS:__________________________________________________________________ CITY:________________________ STATE:_____________ ZIP:________________________ TELEPHONE: (Day)_________________________________________________________ (Night)________________________________________________________ SERIAL#:____________________________________________________________________ MODEL#:____________________________________________________________________ PURCHASE DATE:____________________________________________________________ PLACE OF PURCHASE:________________________________________________________ PART # DESCRIPTION “YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS” *This form can also be faxed to #: 626-810-2166...

Table of Contents