Table of Contents
Advertisement
ASSEMBLY
Tool:
6mm Allen Wrench with
Phillips Screwdriver
1 PC
3.
Main Frame Assembly
Use the 6mm Allen Wrench with Phillips Screwdriver provided to remove the six Bolts (39)
and the six Washers (40) from the Rear Main Frame (26). Connect the Extension Hand
Pulse Sensor Wire I (29) from the Rear Main Frame (26) with the Extension Hand Pulse
Sensor Wire II (55) from the Front Main Frame (73). Insert the Rear Main Frame (26) into
Front Main Frame (73). Make sure the wires stay connected and are not pinched. Re-insert
the six Bolts (39) and the six Washers (40) into the Front Main Frame (73). Tighten the six
Bolts (39) using the 6mm Allen Wrench with Phillips Screwdriver Provided.
11
Hide quick links:
Advertisement
Table of Contents
