Phone Registration - Avaya 1600 Series Installation Manual

2.8 Phone Registration

For new phones and phones that have been
enabled the extension number used, if free, will create new extension and user entries in the IP Office configuration. If
auto-create is not enabled, the extension number used must match a VoIP extension entry within the IP Office
configuration, see Manually Creating Extensions
To register a phone:
1. Following file loading the phone will request extension information:
·
Ext. =
Enter the extension number the phone should use and press #. Wrong Set Type is displayed if you try to use
the extension number of an existing non-IP extension.
·
Password =
The password used is as follows:
·
If using auto-creation for a extension, enter the password that was specified when
46
enabled
·
If not using auto-create, enter the Phone Password as set in the system configuration for the extension.
If a Phone Password has not been set, the system checks against the matching user's Login Code.
·
The system disables the use of default passwords, such as 0000 which is supported by some phones. See
Blocking Default Passcodes
2. Test that you can make and receive calls at the extension.
H323 Telephone Installation
IP Office™ Platform 11.0
reset 71
44 .
.
24
.
Comments on this document? infodev@avaya.com
, the phone will request an extension number. If auto-create
auto-create was
Issue 23e (Friday, February 15, 2019)
46 is
Page 50