Phone Registration - Avaya IP Office 3.0 Installation Manual

4. Phone Registration

The following will also occur following any power loss to the telephone.
1. Following file loading, the phone displays Ext. =. Enter the extension number you want applied to
the phone and press #.
• On 4601 and 5601 phones, this stage is indicated by the lamp at the top of the phone and
on the MESSAGES button flashing 0.5 seconds on/off.
•
If not using auto-create extension, the extension number selected must be a pre-configure
VoIP extension, see Manually Creating Extensions.
• If the phone has been previously installed and has not been reset it will display the
extension number that it last used.
• Wrong Set Type is displayed if you try to use the extension number of an existing non-IP
extension.
2. The phone displays Password =.
• If using auto-create extension for a new extension, just enter any number and press #.
Any digits entered for a password here are not validated or stored.
• If not using auto-create extension for a new extension, enter the User's Login Code set in
the IP Office Manager.
•
During subsequent phone restarts, even though the password is requested, it will only be
validated if the phone's extension number is changed.
3. On display phones, the phone display the time, date and then its extension number.
4. Test that you can make and receive calls at the extension.
Avaya IP Phone Installation
IP Office 3.0
Installation
Issue 10b (26th January 2005)
Page 17