Avaya 1600 Series Installation Manual page 4

1. IP Office H.323 IP Phones
This documentation provides notes for the installation of
should be used in conjunction with the existing installation documentation for those series of phones, especially the
following:
·
Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.323
http://support.avaya.com/css/P8/documents/101009345
·
Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.323
http://support.avaya.com/css/P8/documents/101009361
·
VPN Setup Guide for 9600 Series IP Deskphones (16-602968)
http://support.avaya.com/css/P8/documents/101008050
·
Avaya one-X Deskphone Edition for 9600 Series IP Telephones Application Programmer Interface
(API) Guide (16-600888)
Covers the configuration and use of WML and PUSH interfaces with 9600 Series telephones.
http://support.avaya.com/css/P8/documents/100165678
·
DHCP versus Static IP Installation
Though static IP installation of H.323 IP phones is possible, installation using DHCP is strongly recommended. The
use of DHCP eases both the installation process and future maintenance and administration. For static installations,
following a boot file upgrade, all static address settings are lost and must be re-entered.
·
Network Assessment
High quality voice transmission across an IP network requires careful assessment of many factors. Therefore:
·
We strongly recommend that IP phone installation is only done by installers with VoIP experience.
·
The whole customer network must be assessed for its suitability for VoIP, before installation. Avaya will refuse
to support any installation where the results of a network assessment cannot be supplied. See
Assessment 12
H323 Telephone Installation
IP Office™ Platform 11.0
for further details.
Comments on this document? infodev@avaya.com
supported Avaya IP phones 6 onto an IP Office system. It
Network
Issue 23e (Friday, February 15, 2019)
Page 4