Table of Contents
Advertisement
How to Install
2.1.3 POWERLINK Cables
Cable type
Ethernet standard Standard Ethernet (in accordance with IEEE
2
2
Cable Type
Damping
Crosstalk damping 24 dB (at 100 MHz and 100 m each)
Return loss
Surge impedance 100 Ω
Table 2.1 Specification of POWERLINK Cables
2.1.4 LED Behaviour
The option has 3 bicolored LEDs that allow a fast and
detailed diagnosis. The three LEDs are each linked to its
unique part of the POWERLINK option:
LED label
Status/Error
Link/Collision
Port 1
Link/Collision
Port 2
Table 2.2 LEDs
Status/error
Link/Collision Port 1
Link/Collision Port 2
Illustration 2.3 Overview of the Option
6
MCA 123 POWERLINK Operating Instructions
Specification
802.3), 100Base-TX (Fast Ethernet)
S/FTP (Screened Foiled Twisted Pair, ISO (IEC
11801 or EN 50173), CAT 5e
23.2 dB (at 100 MHz and 100 m each)
10 dB (100 m each)
Description
Module Status, reflects the activity on the
POWERLINK slave.
Link/Collision Port 1, reflects the activity on the
POWERLINK port 1.
Link/Collision Port 2, reflects the activity on the
POWERLINK port 2.
Powerlink Port 1
Powerlink Port2
Port 1
MCA123
S/E LED
POWERLINK
L/C LED P1
MAC 00-1B-08-00-00-00
L/C LED P2
Address
SW. ver.
TM. ver.
8 7 6 5 4 3 2 1
MG92C102 - VLT
Port 2
Option A
130B1489
ON
OFF
®
is a registered Danfoss trademark
Advertisement
Table of Contents
