Setting Up The Controller Without The Configuration Files - Omron CJ2 Series Network Connection Manual

10. Appendix 2 Setting the Tag Data Links Using the Software

10.3. Setting Up the Controller without the Configuration Files

Set up the Controller using the software.
10.3.1. Starting the Sysmac Studio and Setting the Parameters for the
Controller
Start the Sysmac Studio and set the parameters for the Controller.
Install the Sysmac Studio and USB driver in the personal computer beforehand.
1
Connect the LAN cable and the
USB cable to the Controller, and
turn ON the power supply to the
Controller.
*For details, refer to step 1 of
7.3.1. Starting the Sysmac
Studio and Importing the
Project File.
2
Start the Sysmac Studio.
Click the New Project Button.
*If a confirmation dialog box for
an access right is displayed at
start, select to start.
48