Omron CJ2 Series Network Connection Manual page 25

4
The OMRON_CJ2_EIP_EV101
project is displayed.
The left pane is called Multiview
Explorer, the right pane is called
Toolbox and the middle pane is
called Edit Pane.
*If an error message is
displayed stating "Failed to
Load Descendants", change
the version of the Sysmac
Studio to the version specified
in 5.2. Device Configuration or
higher version.
5
Select Check All Programs
from the Project Menu.
6
The Build Tab Page is displayed
in the Edit Pane.
Confirm that "0 Errors" and "0
Warnings" are displayed.
7
Select Rebuild Controller from
the Project Menu.
8
A confirmation dialog box is
displayed. Confirm that there is
no problem and click the Yes
Button.
9
Confirm that "0 Errors" and "0
Warnings" are displayed in the
Build Tab Page.
7. EtherNet/IP Connection Procedure
Multiview Edit Pane Edit Pane
Explorer
Toolbox
22