Omron CJ2 Series Network Connection Manual page 58

10. Appendix 2 Setting the Tag Data Links Using the Software
7
The Communications Setup
Dialog Box is displayed.
Select the Direct connection via
USB Option for Connection
Type.
Click the OK Button.
8
Select Online from the
Controller Menu.
A confirmation dialog box is
displayed. Check the contents
and click the Yes Button.
*The displayed dialog box
depends on the status of the
Controller used. Check the
contents and click the Yes
Button to proceed with the
processing.
9
When an online connection is
established, a yellow bar is
displayed on the top of the Edit
Pane.
Additional Information
For details on online connections to a Controller, refer to Section 5 Online Connections to a
Controller of the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
10
Select Synchronization from
the Controller Menu.
55