Omron CJ2 Series Network Connection Manual page 15

5
Connect the LAN cable to the
EtherNet/IP port of the PLC, and
connect the USB cable to the
USB port. Connect the personal
computer, Switching Hub and
PLC as shown in 5.2. Device
Configuration.
6
Turn ON the power supply to the
PLC.
The set IP address is displayed
on the seven-segment LED
indicators from right to left.
Afterwards, the rightmost 8 bits
of the IP address are displayed
in hexadecimal during normal
operation.
7. EtherNet/IP Connection Procedure
CPU Unit
PLC
USB cable
Power Supply Unit
Switching Hub
LAN cable
12