10. Appendix 2 Setting the Tag Data Links Using the Software
10. Appendix 2 Setting the Tag Data Links Using the
Software
This section describes the procedure for setting the Controller without the configuration files
(Procedure for setting parameters from the beginning).
You can also refer to this section when you want to change the parameters of the
configuration files.
10.1. Overview of Setting Tag Data Links
The following is the relationship between the processes to operate the tag data links using the
"procedure for setting parameters from the beginning".
Settings made with Sysmac Studio
•Setting parameters (IP address,
etc.)
•Setting global variables (name,
network setting and task setting,
etc.)
•Exporting global variables
•Building
Sysmac Studio
Transferring the
Project Data
Settings made with Network
Configurator
•Uploading network configuration
•Importing CSV file (tag name)
•Tag registration
•Connection setting (associating tags)
Personal computer
Global variable
(CSV file)
Transferring tag data
link parameters
Controller
Network Configurator
Destination
device
45