Omron CJ2 Series Network Connection Manual page 64

10. Appendix 2 Setting the Tag Data Links Using the Software
Additional Information
If an online connection cannot be made to the Controller, check the cable connection. Or,
return to step 1, check the settings and repeat each step.
For details, refer to 7-2-8 Connecting the Network Configurator to the Network in Section 7
Tag Data Link Functions of the NJ-series CPU Unit Built-in EtherNet/IP
(Cat. No. W506).
7
Select Upload from the Network
Menu to upload the device
information on the network.
8
The dialog box on the right is
displayed. Confirm that there is
no problem and click the Yes
Button.
9
The Target Device Dialog Box is
displayed.
Select the192.168.250.1
Checkbox and the
192.168.250.2 Checkbox, and
click the OK Button.
*If 192.168.250.1 or
192.168.250.2 is not displayed
on the dialog box, click the Add
Button to add the address.
*The displayed addresses
depend on the status of the
Network Configurator.
TM
Port User's Manual
61