10. Appendix 2 Setting the Tag Data Links Using the Software
10.4. Setting Up the Network Using the
Software
↓
10.4.1. Connecting Online and
Uploading Configuration
↓
10.4.2. Setting the Tags and Tag Sets
↓
10.4.3. Importing the File, Registering
the Tags and Setting the Tag
Sets
↓
10.4.4. Setting the Connection
↓
10.4..5 Transferring the Tag Data Link
Parameters
↓
7.5. Checking EtherNet/IP
Communications
↓
7.5.1 Checking the Connection Status
↓
7.5.2 Checking the Data that are Sent
and Received
Set the tag data links for EtherNet/IP using the
software.
Start the Network Configurator, connect online with
the Controller, and upload the network configuration.
Set the tags and tag sets of the send area and
receive area of the PLC.
Import the CSV file that was saved, register tags of
the originator's send area and receive area, and set
the tag sets.
Associate the tags of the target device with the tags
of the originator.
Transfer the set tag data link parameters to the
Controller.
Confirm that the EtherNet/IP tag data links are
operated normally.
Check the connection status of EtherNet/IP.
Confirm that the correct data are sent and received.
47