Process Representation Input; Process Representation Input (Default Process Representation) - AUMA Profibus PBD 100 Operation Manual

Operation manual
7

Process representation input

Via the process representation input, the master (control) can read the state of the slave (actuator).
7.1

Process representation input (Default process representation)

Byte 1: Logical operation
Bit Bit Bit Bit Bit Bit Bit
7 6 5 4 3 2 1
Byte 5: Fault
Bit Bit Bit Bit Bit Bit Bit
7 6 5 4 3 2 1
Byte 9
High byte
First customer analogue input
(Wiring diagram analogue 2)
Byte 13
Spare
Important:
The Profibus PBD 100 Interface PCB is a development of the Werner Riester GmbH & Co. KG. Not all functions are supported in connection
with AUMA Industry & Marine actuators. In the following it is described which data bits will be used.
23.07.2007
Profibus PBD 100
Byte 2: Actuator switches
Bit Bit Bit Bit Bit Bit Bit
0 7 6 5 4 3 2
Byte 6: Warning
Bit Bit Bit Bit Bit Bit Bit
0 7 6 5 4 3 2
Byte 10
Low byte
First customer analogue input
(Wiring diagram analogue 2)
Byte 14
Spare
Byte 3
Position transmitter
high byte
Bit Bit
1 0
Byte 7: Physical operation
Bit Bit Bit Bit Bit Bit Bit
1 0 7 6 5 4 3
Byte 11
High byte
Second customer analogue
input (Wiring diagram
analogue 3/4)
Byte 15
Spare
Byte 4
Position transmitter
low byte
Byte 8: Options
Bit Bit Bit Bit Bit Bit Bit
2 1 0 7 6 5 4
Byte 12
Low byte
Second customer analogue
input (Wiring diagram
analogue 3/4)
Byte 16
Spare
14/36
Bit Bit Bit Bit
3 2 1 0