How To Order; Drive Configurator; Fc Identification - Danfoss VLT Micro Drive FC 51 Design Manual

How to Order

5 How to Order

5.1 Drive Configurator

It is possible to design a frequency converter according to
the application requirements by using the ordering
number system.
To order standard frequency converters and frequency
converters with integral options, send a type code string
5 5
describing the product to the Danfoss sales office. An
example type code:
FC051PXXXXXXXXHXXXXXXXSXXX
Use the web-based Drive Configurator to configure the
right frequency converter for the right application and
generate the type code string. The Drive Configurator
automatically generates an 8-digit sales number (either for
1 product or a project list with several products) to be
delivered to your local sales office.
Fine the Drive Configurator at: www.vlt-drives.danfoss.com/
support/drive-configurator/.
38
®
VLT Micro Drive FC 51

5.2 FC Identification

The nameplate sticker is located on the top of each
frequency converter and shows the ratings, serial number,
warnings catalog number, and other relevant data for each
unit. See Table 5.2 for details, how to read the type code
string.
Illustration 5.1 Nameplate Sticker
Danfoss A/S © 01/2016 All rights reserved. MG02K402