Omron ZEN Operation Manual page 48

Display Screen and Basic Operations
Example Parameter Settings Screen Operation
Select
Parameters
on menu
screen.
(1) Selecting Parameters to Display
/
/
(2) Setting and Changing Parameters
/
When Parameter is selected, the parameter
settings are displayed.
Press the OK Button to change the high-
lighted cursor to a flashing cursor.
Use the Up/Down Buttons to select another
timer.
When multiple parameters of the same type
have been selected, use the Up/Down But-
tons to scroll through the numbers.
Press the Left Button to switch to another
type, move the flashing cursor to the bit type
position and use the Up/Down Buttons to
select the bit type.
Move the flashing cursor to the bit type posi-
tion and use the Up/Down Buttons to select
another bit type.
Use the Left/Right Buttons to move the high-
lighted cursor to the parameter to be set.
Press the OK Button to confirm the set posi-
tion. The cursor will change to a flashing cur-
sor.
Use the Up/Down Buttons to set the param-
eter.
Press the OK Button to confirm the setting.
Section 1-3
25