Operating Environment Precautions; Conformance To Ec Directives; Applicable Directives; Concepts - Omron ZEN Operation Manual

Operating Environment Precautions

3

Operating Environment Precautions

4

Conformance to EC Directives

4-1

Applicable Directives

4-2

Concepts

xvi
Do not operate the control system in the following places.
• Where the ZEN is exposed to direct sunlight.
• Where the ambient temperature or humidity is beyond the speci-
fied ranges.
• Where the ZEN may be affected by condensation due to radical
temperature changes.
• Where there is any corrosive or inflammable gas.
• Where there is excessive dust, saline air, or metal powder.
• Where the ZEN is affected by vibration or shock.
• Where any water, oil or chemical may splash on the ZEN.
• Any other place with conditions beyond those specified in the
general specifications.
Take appropriate and sufficient countermeasures when installing sys-
tems in the following locations:
• Locations subject to static electricity or other forms of noise.
• Locations subject to strong electromagnetic fields.
• Locations subject to possible exposure to radioactivity.
• Locations close to power supplies.
• EMC Directives
• Low Voltage Directive
EMC Directives
OMRON devices that comply with EC Directives also conform
to the related EMC standards so that they can be more easily
built into other devices or the overall machine. The actual
products have been checked for conformity to EMC standards
(see the following note). Whether the products conform to the
standards in the system used by the customer, however, must
be checked by the customer.
EMC-related performance of the OMRON devices that comply
with EC Directives will vary depending on the configuration,
3