Preparations For Operation - Omron ZEN Operation Manual

Preparations for Operation

1-6

Preparations for Operation

Mount ZEN to Control Panels
The ZEN can be mounted to either a
DIN Track or directly onto the surface
of the control panel. Refer to page 32.
Connect Power Supply, Input, and Output
Devices
Wire the ZEN to the power supply, input, and
output devices. Refer to page 33.
Make Initial Settings
Make the settings required before
programming, such as date, time, and
display language. Refer to pages 50
and 51.
Write Program
Input the ladder program, including
timers, counters, and other parameters.
Use the ZEN Support Software when
using the LED-type CPU Units (without
LCD or operation buttons.) Refer to
page 52.
Check Program Execution
Perform trial operation before starting actual
operation and check that the system is
operating correctly. Refer to page 62.
Save Program
Debugged programs and all parameters
should be saved to a Memory Cassette
or ZEN Support Software to prevent
loss of the data. Refer to page 97.
Actual Operation
30
DIN Track
Power
supply
Output
LCD-type CPU
Unit
ZEN-ME01
Memory Cassette
Section 1-6
Inputs
Operation
buttons
ON OFF