Deleting Blank Lines - Omron ZEN Operation Manual

Correcting Ladder Programs
Blank line
Note
3-5-5

Deleting Blank Lines

Move the high-
lighted cursor to the
beginning of the
line to be deleted.
Note
66
A blank line cannot be inserted if an input or connection line is
written in the last line (the 96th line).
A line must be blank to be deleted, i.e., lines containing inputs
and outputs cannot be deleted.
Press the ALT Button to reserve a 1-line
space between the parallel inputs.
The vertical connection lines will be automat-
ically extended.
To delete a blank line, move the highlighted
cursor to the input position at the beginning
of the line to be deleted and press the DEL
Button.
This line will be deleted.
Press the DEL Button to delete one blank
line. All following lines will move up one.
Section 3-5