Maintenance; Transportation And Storage - Omron ZEN Operation Manual

Application Precautions
2-6

Maintenance

2-7

Transportation and Storage

• Attaching or removing the Memory Cassette.
• Attaching or removing the Battery Unit.
• Confirm that no adverse effect will occur in the system before
attempting any of the following. Not doing so may result in an
unexpected operation.
• Changing the operating mode.
• Using the button switches.
• Changing bit status or parameter settings.
• Before touching a Unit, be sure to first touch a grounded metallic
object in order to discharge any static build-up.
• Do not pull on the cables or bend the cables beyond their natural
limit. Doing either of these may break the cables.
• Do not place objects on top of the cables or other wiring lines.
Doing so may break the cables.
• Do not short the battery terminals or charge, disassemble, heat,
or incinerate the battery. Do not subject the battery to strong
shocks. Doing any of these may result in leakage, rupture, heat
generation, or ignition of the battery. Dispose of any battery that
has been dropped on the floor or otherwise subjected to exces-
sive shock. Batteries that have been subjected to shock may
leak if they are used.
• Abide by all local ordinances and regulations when disposing of
the ZEN.
• When replacing parts, be sure to confirm that the rating of a new
part is correct.
• When replacing a Unit, transfer to the new Unit and confirm all
settings for clock data, internal holding bits, holding timers, and
counter before starting operation again.
• Use special packaging boxes when transporting the ZEN and do
not subject it to excessive shock or vibration or drop it during
shipment.
• Store the ZEN in the following temperature and humidity ranges
without condensation or icing.
Model
LCD –20 to 75°C
LED –40 to 75°C
Ambient Humidity
temperature
10% to 90%
2
xv