Deleting Inputs, Outputs, And Connection Lines; Inserting Lines - Omron ZEN Operation Manual

Correcting Ladder Programs
3-5-3

Deleting Inputs, Outputs, and Connection Lines

Example: Deleting Serial Input M3
Move the high-
lighted cursor to the
position of the input
to be deleted.
Example: Deleting Vertical Connecting Lines
3-5-4

Inserting Lines

• To insert a blank line, move the highlighted cursor to the beginning of the line where
the blank line is to be inserted and press the ALT Button.
Move the highlighted
cursor to the beginning
of the next line (the line
that will be after the
inserted line.)
Blank line
• To add OR programming, inputs can be added between parallel inputs. Move the
highlighted cursor to the beginning of the line where the input is to be inserted.
Move the highlighted
cursor to the beginning
of the next line (the line
that will be after the
inserted line.)
Move the highlighted cursor to the position of
the input, output, or connection line to be
deleted and press the DEL Button.
Press the DEL Button to delete the input and
the related connecting lines at the same
time.
Move the highlighted cursor to the input posi-
tion to the right of the vertical line to be
deleted. Press the ALT Button to enable
drawing connection lines. The highlighted
cursor will change to a left arrow cursor.
Press the DEL Button to delete the vertical
connection line.
A circuit will be added here.
Press the ALT Button to insert one blank line.
A input will be added here.
Section 3-5
65