Loading Quick Save Presets From Removable Media; System Setups - Philips EPIQ 7 User Manual

Customizing the System
NOTE
If you receive an error message when exporting data to a DVD or when viewing exam data on a
DVD, you may need to eject the DVD from the drive and re-insert it.
1. Load a DVD into the DVD drive, or connect a USB device to a USB port on the system.
2. On the control panel, press Support.
3. Click System Management.
4. Click Backup/Restore.
5. From the Select the Media menu, select the removable media that you are using.
6. Click Backup. The backup list shows the data that is backed up.
7. If a dialog box indicates that the media is too full to complete the copy process, replace the
media and click Backup again.
8. After the backup is complete, click Close.
9. Click Done.

Loading Quick Save Presets from Removable Media

1. Load the DVD containing the data into the DVD drive, or connect the USB device containing
the data to a USB port on the system.
2. On the control panel, press Support.
3. Click System Management.
4. Click Backup/Restore.
5. From the Select the Media menu, select the media type that you are using.
6. Deselect the data that you do not want to import.
7. After the import is complete, click OK.
8. To close the Philips SupportConnect display, click Close. A displayed message might prompt
you to restart the system.

System Setups

Setups are system parameters that you can change. By changing setups, you can customize the
system to meet your operating preferences.
150 EPIQ 7 User Manual 4535 617 25341
Presets