Presets
Creating Quick Save Presets
You can create a new Quick Save preset that is based on an existing preset. You can do this
even during an exam, while using the preset.
1. Touch the Transducer name.
2. Touch the preset on which you want to base your Quick Save preset.
3. Adjust the system controls to create the settings for your preset. (You can select an imaging
mode, an image orientation, the number of focal zones, and so on.)
4. Swipe the touch screen, from right to left, to view the second page of the transducer
presets.
5. Touch Save Preset.
•
•
•
6. Click OK.
Deleting Quick Save Presets
You can delete any Quick Save preset on the system except the active preset.
1. If a preset you want to delete is active, deactivate it by touching the associated transducer
name and a different preset.
2. Swipe the touch screen, from right to left, to view the second page of the transducer
presets.
3. Touch Delete User Presets.
4. Click OK.
Copying Quick Save Presets to Removable Media
You can copy Quick Save presets to a DVD or a USB storage device. This function is useful for
archiving presets and for sharing presets among other EPIQ 7 systems. When you copy Quick
Save presets, all available data is copied.
EPIQ 7 User Manual 4535 617 25341
For the Quick Save Label, type the name of the new preset. If you do not enter a name
before saving a preset, the system assigns a name.
For Calculation Package, select a calculation package.
For Annotation/Body Marks, select the annotation and body mark you want as the
defaults.
Customizing the System
149