Table of Contents
Advertisement
System Controls
For this type of control
Utilities Touch Screen
The Utilities touch screen displays three sub-tabs:
• Physio: contains the controls for the Physio features. For details about Physio controls, see
the "Physio Touch Screen Controls" topic in the Help.
• DVR: contains the controls to operate the DVD recorder. For details about the DVD recorder
controls, see the "Video Touch Screen Controls" topic in the Help.
• System: contains controls that allow you to temporarily adjust system configurations for an
exam. You can also access Setups from this tab to make permanent changes to the system.
For details about the System controls, see
125.
System Tab Touch Screen Controls
This topic describes the touch screen controls for the System tab on the Utilities touch screen.
Some of the controls are visible immediately, and others may be visible only when particular
transducers or presets are active.
To use a touch screen control or change its setting, touch it. If it is in the bottom row, you can
also turn or press the knob directly below it.
System Tab Touch Screen Controls
Name
Accept Prior to Store
Capture Type
CP Brightness
Export IQ Optimization
EPIQ 7 User Manual 4535 617 25341
Do this
Touch to turn a function on or off. The control is amber when the function is
on. In this example, XRES imaging is on.
Touch to change the value displayed on the control. Repeatedly touching
this type of control cycles through the range of available values.
"System Tab Touch Screen Controls" on page
Description
A control used to display image loops for approval before they are stored.
A control used to select the capture type: prospective (for a number of beats) or
retrospective (for a number of seconds).
A control used to adjust the brightness of the control panel and the touch screen
display.
A control used to start the Export IQ Wizard.
Using the System
125
Advertisement
Table of Contents
