Battery Indicators - Philips EPIQ 7 User Manual

Using the System Power Management
When the system is on battery power, the Sleep Mode time-out is approximately 20 minutes.
The system remains in Sleep Mode until it is awakened or powered off, or until the batteries
discharge to a critically low state. If the system batteries discharge to a critically low state, the
system safely shuts down from Sleep Mode.
To put the system in Sleep Mode, press or disconnect the power cord.
To awaken the system, press .
For information on the Sleep Mode status indicators, see "Turning the System On and Off" on
page 113.
NOTE
When the system is in Sleep Mode and is connected to AC power, the system remains in Sleep
Mode until it is awakened.

Battery Indicators

The battery charge level is indicated by icons on the system display.
CAUTION
The batteries are used to ensure quick system startup and easy movement of the system
only. You cannot perform scans while in battery mode.
NOTE
The system batteries are a purchasable option. If this option is not purchased, the battery icon
is not displayed.
132 EPIQ 7 User Manual 4535 617 25341