The monitor is mounted on an articulated arm that permits it to be positioned vertically and in
an arc from side to side. The monitor arm can also be locked for moving the system. You can
adjust the brightness of the monitor image to compensate for ambient light. You can also
change the default brightness setting for the monitor.
Positioning the Monitor
You can adjust the position of the monitor to suit different operating positions and operator
1. Press the button on the articulation arm, just above the control panel, to release the
monitor from its locked transport position.
Monitor Articulation Arm Button
2. Grasp the monitor firmly and do one of the following:
Changing the Monitor Tint
In the setups, you can change the tint of the system display. The Monitor Tint setting affects
only the appearance of images on the monitor; it does not affect saved or exported images.
Three settings are available:
• sRGB provides the maximum dynamic range and most-balanced tint. Use it to match the
look of the system display to a review station display that is set to the sRGB standard.
EPIQ 7 User Manual 4535 617 25341
Tilt the monitor up and down
Swivel the monitor left and right
Move the monitor side to side
Using the System