Table of Contents
Advertisement
System Controls
Control Panel Adjustments
The control panel is mounted on an articulated arm that permits it to be positioned vertically
and in an arc from side to side. The control panel arm can also be locked for moving the system.
You can adjust the brightness of the control panel to compensate for ambient light. You can
also change the default brightness setting for the control panel.
Adjusting Control Panel Brightness
The control panel and touch screen brightness controls in the setups allow you to adjust the
brightness of the control panel and touch screen to compensate for changes in ambient light.
1. Touch Utilities.
2. On the System tab, touch Setups.
3. Do one of the following:
•
•
Positioning the Control Panel
You can swivel the control panel, move it side-to-side, and move it up and down to improve
ergonomics.
1. Press the
2. Push the foot pedal fully down to engage the brakes. See
Locks" on page
CAUTION
You must engage the brakes to change the position of the control panel. If the brakes are not
engaged, the release button on the front handle will light when pressed, but the control
panel will not unlock.
3. Press the release button on the front handle.
EPIQ 7 User Manual 4535 617 25341
Select System Settings, and click Display. Select a setting for Control Panel Brightness.
Turn the CP Brightness knob, or touch CP Brightness until your preferred brightness is
selected.
(On/Off) control to turn on the system.
115.
Using the System
"Using the Brakes and Steering
121
Advertisement
Table of Contents
