Preparing And Moving The System - Philips EPIQ 7 User Manual

Preparing the System Moving the System
CAUTION
Before moving the system, ensure that the brakes are completely released by moving the
brake pedal to its middle position. Otherwise, the engaged brake pad can damage the rubber
casters on the wheels.
CAUTION
Ensure that the cables for all patient-applied parts are secure before moving the system. Use
the cable management system to ensure that transducer cables are protected from damage.
CAUTION
Do not roll the system over transducer cables or power cables.
CAUTION
When transporting the system in a vehicle, avoid exposing the monitor to direct sunlight, and
do not let the inside temperature of the vehicle exceed 65°C (149°F). Either of these
conditions can permanently damage the monitor.

Preparing and Moving the System

CAUTION
When shipping the system, make sure the batteries are inserted upside down to prevent
electrical discharge.
1. Press (On/Off) to turn off the system.
2. Engage the wheel brakes by pressing the pedal fully down.
3. Squeeze the release button on the front handle and use the handle to center the control
module and move it to a comfortable height for moving.
108 EPIQ 7 User Manual 4535 617 25341