Table of Contents
Advertisement
Using the System
3. When the exam is finished, do the following:
a.
b.
c.
d.
Setting the Auto Freeze Function
The Auto Freeze function stops imaging and freezes the image, if a control is not manipulated
within the Wait time that you specify. The default time is 5 minutes. After Auto Freeze has been
invoked, press any control to restart imaging.
1. Touch Utilities.
2. On the System tab, touch Setups.
3. Click System Settings.
4. Click the Display tab.
5. Under Auto Freeze, select On, and then select the Wait time.
6. Click Done.
Transducer Receptacles and Cable Management
The system includes four receptacles for imaging transducers, one receptacle for a pulsed- or
continuous-wave Doppler probe, and one receptacle for physio, if physio is included in your
system's configuration. All receptacles can be occupied simultaneously, but only one transducer
at a time can be active.
140
Touch End Exam.
Edit the information in the Patient Data display
Click End Exam.
Click Done.
Setting the Auto Freeze Function
EPIQ 7 User Manual 4535 617 25341
Advertisement
Table of Contents
