Access Control - NETGEAR ME103 User Manual

Wireless Access Point User Guide

Access Control

The Access Control feature allows administrators to prevent "unknown" Wireless stations
from using the Access Point.
This screen is accessed by the Access Control link in the Advanced section of the menu.
The Table shows all "Known" (Trusted) wireless stations. If Access Control is enabled, only
these stations can use the Access Point.
Access Control Screen
Turn Access
Control On
Mac Address
Station Name
Buttons
Add
Edit
Delete
Apply
Cancel
Figure 21: Access Control Screen
Check this box to enable the Access Control feature.
For each Wireless station, the MAC (physical) address is shown.
The name of each Wireless station is shown.
Add a new Wireless station to the list.
Edit an existing Wireless Station. You need a select a station, using
the radio buttons on the left.
Deleted an existing Wireless Station. You need a select a station,
using the radio buttons on the left.
Save the settings on this screen.
Reverse any settings made since the last save.
30