Wireless Screen - NETGEAR ME103 User Manual

WINS
If your LAN has a WINS server, enable this setting, and enter the
Enable WINS
name or IP address of your WINS server.

Wireless Screen

The settings on this screen must match the settings used by Wireless Stations.
Click Wireless on the menu to view a screen like the following.
Wireless Screen
The default name may be changed if desired.
Access Point Name
Note: In 802.1x mode, this name is used as the Client Login Name
for the Radius Server.
Domain This will display the domain or region for which the Wireless
module is licensed for use.
Automatic If set to Enable, the Wireless Access Point will self-select a Wireless
Channel Selection Channel.
If set to Disable, the Channel you select in the drop-down list will be
used.
SSID This must match the value used on the Wireless Access Point. The
default value is netgear
Note: The SSID is case sensitive.
Figure 9: Wireless Screen
Setup
13