NETGEAR ME103 User Manual page 18

Security Settings - non 802.1x Mode
Figure 11: Security Settings - non 802.1x Mode
Data - Security Screen (non 802.1x Mode)
Data Encryption
Enable
Authentication Type
Encryption
Passphrase
Key 1.. Key 4
Enable this if you wish to use WEP.
•
You must provide at least one Key value.
•
All Wireless Stations must have the same settings.
Normally, you can leave this at "Automatic", so that Wireless
Stations can use either method ("Open System" or "Shared
Key".).
If you wish to use a particular method, select the appropriate
value - "Open System" or "Shared Key". All Wireless stations
must then be set to use the same method.
Select the desired option:
•
64 Bit Encryption
•
128 Bit Encryption
To generate a key or set of keys from a word or phrase:
1. Select the type of key required (64 Bit or 128 Bit)
2. Enter the word or phrase in the "Passphrase" field.
3. Click the "Generate Keys" button.
4. The screen will refresh with the key value(s) inserted.
Select the key you wish to be the default. Transmitted data is
ALWAYS encrypted using the Default Key; the other Keys
are for decryption only.
All Wireless stations must use the same key as the Access
Point.
Setup
15