Physical Details - NETGEAR ME103 User Manual

Physical Details

Front Panel LEDs
Status On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up, or when the Firmware is being
upgraded.
Power On - Normal operation.
Off - No power
Link/Act On - The LAN (Ethernet) port is active.
Off - No active connection on the LAN (Ethernet) port.
Flashing - Data is being transmitted or received via the corresponding
LAN (Ethernet) port.
100 On - LAN (Ethernet) port is using 100BaseT.
Off - LAN (Ethernet) port connection is using 10BaseT, or is not active.
WLAN On - Wireless connection is available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. Data includes "network traffic" as well as user data.
Figure 2: Front Panel
Introduction
5