NETGEAR ME103 User Manual page 42

Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from the Wireless Access Point.
Using "Specify an IP Address"
•
If your PC is already configured, do NOT change the settings on the IP Address tab shown
in Figure 25 above.
•
On the Gateway tab, enter the Wireless Access Point's IP address in the New Gateway
field and click Add. Your LAN administrator can advise you of the IP Address they
assigned to the Wireless Access Point.
Figure 25: IP Address (Win 95)
Figure 26: Gateway Tab
Appendix C - Specifications
39