Change Password Screen - NETGEAR ME103 User Manual

To generate a key or set of keys from a word or phrase:
Passphrase
5. Select the type of key required (64 Bit or 128 Bit)
6. Enter the word or phrase in the "Passphrase" field.
7. Click the "Generate Keys" button.
8. The screen will refresh with the key value(s) inserted.
Key 1.. Key 4 Select the key you wish to be the default. Transmitted data is
ALWAYS encrypted using the Default Key; the other Keys are for
decryption only.
All Wireless stations must use the same key as the Access Point.
SSID Broadcast
Wireless Network If set to Enable, the Wireless Access Point will broadcast its SSID,
allowing Wireless Stations which have a "null" (blank) SSID to
Name (SSID)
adopt the correct SSID. If set to Disable, the SSIS is not broadcast.
Broadcast
Radius Server Login
Radius Server Enter the name or IP address of the Radius Server on your network.
Name/IP address
Enter the port number used for connections to the Radius Server.
Server Port
Shared Key This is used for the Client Login on the Radius Server. Enter the key
value to match the Radius Server.
Note: The Client Name is the name of the Wireless Access Point.
Current Login This read-only field displays the current login status, to the Radius
Status Server, for this Wireless Access Point.

Change Password Screen

The password screen allows you to assign a password to the Wireless Access Point. This
password limits access to the configuration interface.
Figure 13: Change Password Screen
Setup
17