NETGEAR ME103 User Manual page 47

Wireless Access Point User Guide
5. Ensure your TCP/IP settings are correct:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from the Wireless Access Point.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check your ISP's documentation before making the following
changes.
•
Enter the Wireless Access Point's IP address in the Default gateway field and click OK.
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
Figure 33: TCP/IP Properties (Win 2000)
44